Status and Statistics
System Summary
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
32
4
System Summary
The System Summary page provides a graphic view of the device, and displays
device status, hardware information, firmware version information, general PoE
status, and other items.
To view system information, click
Status and Statistics
>
System Summary
.
System Information:
•
System Description
—A description of the system.
•
System Location
—Physical location of the device. Click
Edit
to go the
page to enter this value.
•
System Contact
—Name of a contact person. Click
Edit
page to enter this value.
•
Host Name
—Name of the device. Click
Edit
page to enter this value. By default, the device hostname is composed of
the word
switch
concatenated with the three least significant bytes of the
device MAC address (the six furthest right hexadecimal digits).
•
System Object ID
—Unique vendor identification of the network
management subsystem contained in the entity (used in SNMP).
•
System Uptime
—Time that has elapsed since the last reboot.
•
Current Time
—Current system time.
•
Base MAC Address
—Device MAC address. If there are several units in the
stack, the base MAC address of the master unit is displayed.
•
Jumbo Frames
—Jumbo frame support status. This support can be
enabled or disabled by using the
page.
NOTE
Jumbo frames support takes effect only after it is enabled, and after
the device is rebooted.
Software Information:
•
Firmware Version (Active Image)
—Firmware version number of the active
image.
NOTE
In a stack, the Firmware Version number shown is based on the
version of the master.
