CipherLab 2564MR, User Manual

Page: 74 / 283

Chapter 2 Selecting Output Interface
Fast
2.1.10 SIMPLE PAIRING FOR IPHONE/IPAD
The window requiring pairing passcode is always pop-up when you are using a Bluetooth
®
connection to an iPhone or iPad. To connect to iOS-based devices more quickly, scan the
barcode below to enable Bluetooth
®
simple pairing so that the passcode-required window
will not show up when establishing a connection. By default, this function is set to Disable.
*Disable
Enable
Note: Simple pairing only supports to the device with Bluetooth
®
v2.1 or later.
2.1.11 BT HID SLAVE/MASTER SWITCHING
By default, the BT HID role is set to slave. Users can have the scanner switch between slave
and master by reading the barcodes below.
*Slave
Master
2.1.12 BT HID AUTO-RECONNECTION
Users can decide whether to have the scanner automatically reconnect to a paired device
after disconnection, and the occasion for reconnecting.
*Auto reconnect
immediately
Auto reconnect on
data being scanned
63
Update