Home
/
Chrysler
/
Pacifica Hybrid 2018
/
Owner'S Manual

Chrysler Pacifica Hybrid 2018, Owner'S Manual, Page: 440 / 617

Share

Page: 440 / 617

Chrysler Pacifica Hybrid 2018 Owner'S Manual Download Page 440

CAUTION!

•

Do not use sling-type equipment when towing. Ve-
hicle damage may occur.

•

When securing the vehicle to a flatbed truck, do not
attach to front or rear suspension components. Dam-
age to your vehicle may result from improper towing.

•

Ensure that the Electric Park Brake is released, and
remains released, while being towed.

ENHANCED ACCIDENT RESPONSE SYSTEM
(EARS)

This vehicle is equipped with an Enhanced Accident
Response System.

Please refer to “Occupant Restraint Systems” in “Safety”
for further information on the Enhanced Accident Re-
sponse System (EARS) function.

EVENT DATA RECORDER (EDR)

This vehicle is equipped with an Event Data Recorder
(EDR). The main purpose of an EDR is to record data that
will assist in understanding how a vehicle’s systems per-
formed under certain crash or near crash-like situations,
such as an air bag deployment or hitting a road obstacle.

Please refer to “Occupant Restraint Systems” in “Safety”
for further information on the Event Data Recorder (EDR).

438

IN CASE OF EMERGENCY

«
...
438
439
440
441
442
...
»

Summary of Contents for Pacifica Hybrid 2018










































































































































































































































































































































































































































































































































































































































Reviews:

No comments