Chrysler Pacifica Hybrid 2018 Owner'S Manual Download Page 400

Page: 400 / 617

Front And Rear Side Marker Lamps

1. Remove the three fasteners from the inner wheel liner

and carefully peel back liner for access.

2. Firmly grasp the front side marker lamp socket and

rotate 1/4 turn counterclockwise to remove it from the
lamp assembly.

3. Remove bulb from the front side marker lamp socket

and replace with a new bulb.

4. Install front side marker lamp socket in lamp assembly

and rotate 1/4 turn clockwise to lock into place.

5. Position the inner wheel liner in place and install the

three fasteners.

Inner Wheel Liner Fasteners

Front Side Marker Lamp Bulb Removal

398

IN CASE OF EMERGENCY

Summary of Contents for Pacifica Hybrid 2018










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica Hybrid 2018

Reviews:

Chrysler Pacifica Hybrid 2018, Owner'S Manual, Page: 400 / 617

Search results

Summary of Contents for Pacifica Hybrid 2018

Reviews: