Chrysler Pacifica Hybrid 2018, Owner'S Manual, Page: 308 / 617

If the system is set when the vehicle speed is below 20 mph
(32 km/h), the set speed shall be defaulted to 20 mph
(32 km/h). If the system is set when the vehicle speed is
above 20 mph (32 km/h), the set speed shall be the current
speed of the vehicle.
NOTE: ACC cannot be set if there is a stationary vehicle in
front of your vehicle in close proximity.
Remove your foot from the accelerator pedal, after the
ACC has been set. If you do not, the vehicle may continue
to accelerate beyond the set speed. If this occurs:
•
The message “ACC DRIVER OVERRIDE” will display
in the instrument cluster display.
•
The system will not be controlling the distance between
your vehicle and the vehicle ahead. The vehicle speed
will only be determined by the position of the accelera-
tor pedal.
To Cancel
The following conditions cancel the system:
•
The brake pedal is applied.
•
The CANC (cancel) button is pushed.
•
An Anti-Lock Brake System (ABS) event occurs.
•
The gear selector is removed from the DRIVE position.
•
The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.
•
The vehicle parking brake is applied.
•
Driver seatbelt is unbuckled at low speeds.
•
Driver door is opened at low speeds.
To Turn Off
The system will turn off and clear the set speed in memory
if:
•
The Adaptive Cruise Control (ACC) on/off button is
pushed.
•
The Normal (Fixed Speed) Cruise Control on/off button
is pushed.
•
The ignition is turned OFF.
To Resume
If there is a set speed in memory push the RES (resume)
button and then remove your foot from the accelerator
pedal. The instrument cluster display will display the last
set speed.
306 STARTING AND OPERATING