Chrysler Pacifica Hybrid 2018 Owner'S Manual Download Page 254

Page: 254 / 617

Summary Of Recommendations For Restraining Children In Vehicles

Child Size, Height, Weight Or Age

Recommended Type Of Child

Restraint

Infants and Toddlers

Children who are two years old or

younger and who have not reached

the height or weight limits of their

child restraint

Either an Infant Carrier or a Convert-

ible Child Restraint, facing rearward

in the rear seat of the vehicle

Small Children

Children who are at least two years

old or who have outgrown the

height or weight limit of their rear-

facing child restraint

Forward-Facing Child Restraint with

a five-point Harness, facing forward

in the rear seat of the vehicle

Larger Children

Children who have outgrown their

forward-facing child restraint, but

are too small to properly fit the vehi-

cle’s seat belt

Belt Positioning Booster Seat and the

vehicle seat belt, seated in the rear

seat of the vehicle

Children Too Large for Child Re-

straints

Children 12 years old or younger,
who have outgrown the height or

weight limit of their booster seat

Vehicle Seat Belt, seated in the rear

seat of the vehicle

252

SAFETY

Summary of Contents for Pacifica Hybrid 2018










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica Hybrid 2018

Reviews:

Chrysler Pacifica Hybrid 2018, Owner'S Manual, Page: 254 / 617

Search results

Summary of Contents for Pacifica Hybrid 2018

Reviews: