Christie Mirage S+, User Manual

Page: 92 / 169

OPERATION
3-54
Roadster/Mirage S+ User’s Manual
to run at 60Hz regardless of the input signal. Image is 100% seamless when
switching sources.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35kHz.
Fade Time
Set how long (in seconds) it takes to gradually dissolve one image into another for a
source switch. Fading is available for single-image “best” source switching only—
PIP cannot be in use, and Image Optimization must be set to Best Switching.
NOTE: PIP must be disabled for Fade Time to take effect. Also, the PIP window
must be closed to activate it.
Numbers Select Main Image
Use Numbers Select Main Image to use the
numeric keys #1-8 as input keys. This remapping
of the keypad (see right) can be particularly useful
with PIP displays, providing a convenient shortcut
for changing the primary (background) image
without first having to return to the
Main menu. To
use the keys in this manner all of the time, even
with single displays, select
Always . For normal
keypad function, select Never (default). Set to
When PIP Active to activate number keys only
when PIP is in use.
NOTE: Numbers Select Main Image keypad
functionality works only when menus are closed.
Whenever you install a new lamp in the
projector, access the
Lamp menu to record
the lamp serial number in the projector’s
memory. You can also choose a lamp mode
for regulating power and light output,
change optical aperture size (if present),
and access other read-only information
pertaining to past and present lamps.
LAMP HOURS
(read-only) shows the
number of hours logged on the current
lamp. Whenever you record a new lamp
serial number this value automatically resets to “0”, where it begins to log time for
the new lamp
. This information also appears in the Status menu.
LAMP S/N
(read-only) is the serial number recorded for the current lamp. When you
install a new lamp and enter its serial number, the number will appear here.
3.9 Working with
the Lamp