![background image](http://html1.mh-extra.com/html/christie/mirage-s/mirage-s_user-manual_2604023025.webp)
INSTALLATION & SETUP
Roadster/Mirage S+ User’s Manual
2-19
the source provides separate horizontal and vertical sync outputs, connect horizontal
sync to the
SYNC
input labeled
HOR/COMP,
and connect vertical sync to
SYNC
input
labeled
VERT.
See Figure 2.25, below.
Figure 2.25. Connecting RGB Input
NOTES:
1)
If for some reason the projector fails to recognize a signal as an RGB signal,
specify this
Color Space
option within the
Image Settings
menu. See
3.6, Adjusting the
Image. 2)
To connect YPbPr signals–such as from DVDs or analog HDTV sources–to
INPUT 1
, use the red, green and blue BNCs as described in
YPbPr Signals
(below)
Connect a YPbPr signal (a.k.a.
component video
) to
INPUT 1
or
INPUT 2
as shown in.
Figure 2.26.
NOTES:
1)
If, for some reason, the projector fails to recognize a YPbPr signal,
specify this
Color Space
option within the
Image Settings
menu. See
3.6, Adjusting
the Image
.
2)
Do not connect digital component signals (known as YCbCr) to
INPUT
1
or
2
. Use the appropriate digital interface option installed at
INPUT 5 or 6
.
Figure 2.26. Connecting
YPbPr
YPbPr
'
(COMPONENT VIDEO)
Summary of Contents for Mirage S+
