Christie Mirage S+, User Manual

Page: 121 / 169

MAINTENANCE
Roadster/Mirage S+ User’s Manual
4-9
8. CLOSE LAMP DOOR
Close the lamp door and lock its two (2) ¼-turn lock screws.
IMPORTANT
The lamp module is calibrated for maximum
performance and brightness in this projector. Do not
attempt to re-align or adjust the lamp module.
9. RECORD THE SERIAL NUMBER OF THE NEW LAMP
Plug in the projector and power it up.
In the Lamp menu, select “Change Lamp”.
In the Lamp S/N text box, enter the serial number.
Press to record the number and to reset the lamp timer. The timer will
now begin to log time for the new lamp.
IMPORTANT
If you neglect to enter a serial number, the lamp timer
will not reset to “0” and will therefore be inaccurate. The
lamp life limit may then expire prematurely.
The filter located at the front side of the projector should be replaced whenever the
lamp is replaced. If you are working in an extremely dusty environment you may
want to replace the filter sooner. Use the filter provided in the Christie approved
Lamp and Filter Kit for your specific projector model (see Table 4.2).
1. TURN OFF THE PROJECTOR, COOL and UNPLUG
Before removing or installing a filter, turn off the projector and allow it to cool
for 5 minutes before unplugging.
Filter Replacement
'
Procedure