3-50
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Section 1: Introduction
3.5.9 Selecting a Display (Starting a Presentation)
NOTES: 1)
For manual operation (i.e., non-automated).
2)
In order to use the TPC software originally
shipped with the projector, the installer typically connects a laptop and uses Christie's DCP Librarian setup
software to download all necessary configuration files to the projector for use at the TPC.
To change to a new source-i.e., a new presentation or display-do the following:
1. Ensure the
CP2000-SB
and TPC are both powered up and operating normally.
2. On the
Touch Panel Controller
(TPC), select the
Main
menu tab.
3. On either of the
Main
menu pages, press the desired display button-the image will update accordingly.
Refer to
Figure 3-39
.
NOTES
:
1)
Depending on your expected needs, your installer may or may not have
configured all sixteen buttons for use.
2)
Buttons may have any icon and/or text.
What Happens When a Button is Selected?
For any display button on the two-page
Main
menu, the projector interprets incoming signal data according to
one of sixteen user-selectable display setups defined at the time of
CP2000-SB
installation (and/or with each
subsequent release of a new digital cinema feature) and stored in projector memory. Each display setup
consists of
Projector Configuration File
(PCF) information as well as additional processing, display
parameters and screen settings optimized for a particular cinema feature or alternative content source. For
proper processing and display of a source, press pre-assigned display button (see
Figure 3-39
) corresponding
to the setup you wish to use-the button will then appear recessed and the projected image will update according
to the display setup assigned to this button. No further adjustment of the image should be necessary. To change
to a different presentation, select a different display button.
Figure 3-39 Source Selection on Main Menu (sample)
1. Select pre-defined source
(large button).
2. Image will change.
To additional sources.
Summary of Contents for CP2000-SB
