Christie CP2000-SB, User Manual

Page: 185 / 203

B-12 CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Section 1: Introduction
Pull-Down Sequence (PDS) requires v2.7 or higher
(PDS 0)
(PDS 1)
(PDS ?)
(PDS! 000) 0 = 2:2 Pull-down
1 = 3:2 Pull-down
Request current pull-down
Reply indicating 2:2 pull-down
Save (SAV)
(SAV) Immediately save all changes to flash memory rather than waiting
for eventual auto save or a power down.
Screen Format (SCF)
(SCF “filename”) Selects a custom or standard screen file stored in the TI head.
Use this screen format file (stored in projector memory).
(SCF?) What is the current screen format?
(SCF!”1920x1080”) Current screen format filename is 1920x1080
Screen Orientation (SOR)
(SOR 0) Sets the position of the projector relative to the screen
0= Front
1= Rear
2=Inverted Front
3=Inverted Rear
(SOR?) What is the current screen orientation setting?
(SOR!0) Current screen orientation is normal front position
Select Input (SIN)
(SIN 0 ) Select which projector (P1) and input (P2) to use.
P1 = Input
0= Input A (SMPTE/cinema)
1= Input B (SMPTE/cinema)
2= Dual SMPTE/cinema
3= DVI-A (non-cinema)
4= DVI-B (non-cinema)
5 = DVI Twin
6 = CineIPM input on DVI-A
7 = CineIPM input on DVI-B
8 = CineIPM input on DVI-Twin (10-bit)
9 = CineIPM channel on DVI-A
10 = CineIPM channel on DVI-B
11 = CineIPM channel on DVI-Twin (10-bit)
P2 = required for P1 = 6, 7
The input number (1-8) or channel number (1-25) of CineIPM.
Available for P1= 6 and P1 = 11 only.
The above will change the input on the selected channel only (1 -
16). To change the input on a different channel, the source number
must be used in front of the parameter that is used. (SIN s1 1)
changes channel one input to 292B.
Function Code / Examples Description and Parameters