3-60
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Section 1: Introduction
UNDERSTANDING LAMP POWER VALUES (%)
The Lamp Power range of 75-110 represents 75%-110% of the power appropriate for the installed lamp. In
other words, you can apply anywhere from 75% of the maximum power intended for the installed lamp up to
an over-drive that exceeds the maximum rating by approximately 10%. Both current (amps) and power (watts)
thresholds are read.
Keep in mind that higher lamp power settings do shorten lamp life-for best results, avoid over-driving a lamp
for extended periods. When using LiteLOC™ (which automatically increases lamp power over time), check
the Status menu lamp power readings periodically as the lamp ages, to prevent prolonged over-driving.
Table 3.23 Lamp Current Ranges
*
CXL-20 requires adaptor kit (P/N 003-001728-XX)
. NOTE:
A Lamp Power setting of 110 will exceed the
maximum values shown here by approx. 10%.
CXL/CDXL Lamps (kW)
Current Range
(amps)
CXL*/CDXL-20 (2.0)
60-85
CXL/CDXL-30 (3.0)
90-120
CXL/CDXL-45 (4.5)
95-155
CXL/CDXL-60 (6.0)
105-165
CDXL-60SD (6.0)
105-170
Figure 3-49 Lamp Power Values
Enter 75 - 110.
Applies 75-110% of
the lamp power rating
for the installed lamp.
EXAMPLE: If a 4.5kW lamp is installed...
Applies 110% of 4500
power rating, or 4950
watts.
Summary of Contents for CP2000-SB
