Panning machine
Chocolate World
13/07/2012 Rev.: 1.1
5
UNIT PLACEMENT
3
5.5 ASSEMBLY OF THE SUPPORT FRAME
The support frame consists of two legs fitted with anti-vibration feet. Utilise the following procedure in order
to assemble the legs:
These operations must be performer with the unit shut off and disconnected from the electricity supply
grid.
-
Lift and place the unit as shown in the figure below, making sure that the power cables do not get
squashed by the weight of the unit.
-
Pick up leg
A
and position it so that the holes for the holding bolts line up with those on the unit
body.
-
Use the spanner (
B)
to insert holding bolt
C
in the hole (
D)
and fasten well.
-
Do the same thing at the top of this leg.
-
Do the same thing on the other support leg.
-
Screw the anti-vibration foot into hole
E
. Do the same thing for all the other anti-vibration feet.
-
Carefully turn the unit right side up and ensure that it is stable.
ADVICE! IN ORDER TO FACILITATE THE ABOVE OPERATIONS THEY SHOULD BE CARRIED OUT WITH THE KETTLE
OFF THE UNIT.
E
D
C
B
A
