Page 32 of 40 IRIS Connect Series Engineering Manual Version 1.8
Default All
Completely resets the IRIS Connect dialler to manufacturing defaults.
Test
The test menu allows checking of all current enabled communication
paths, and will test both polling and alarms.
The current connections statuses for all paths can also be seen.
When first accessing the test menu “Test in progress” will be displayed.
The dialler will start to test the communication paths configured.
Once the tests are complete the following possible outcomes are
available as shown in the table below.
Testing
Results and explanations
SSID
Indicates the configure Wi-Fi network.
WiFi
Connected
: Confirms the dialler is connected to the Wi-Fi network.
Not Connected
: The dialler is currently not connected to the Wi-Fi network; check the Wi-Fi
network details and Wi-Fi Router.
Wifi signal
strength
Indicates current Wi-Fi signal strength which is recommended to be above 20 or higher for
reliable communications; if below the minimum require look to either move the dialler to get
better coverage or fit an external Wi-Fi antenna.
