IRIS Connect Series Engineering Manual Version 1.8
Page 11 of 40
Configuration
To configure your dialler, use any of the following methods:
Web browser via Wi-Fi.
Alarm panel integration e.g. Honeywell Galaxy (RS485 connection) Texecom Premier range (Serial TTL
connection). Please refer to
Section 7.10 “Panel configuration”
.
Note: For connections to Honeywell Galaxy or Texecom Premier on the serial integration ensure that the
alarm panel is configured first as this will transmit configuration to the IRIS Connect dialler.
For more details on the alarm panel integration download the full panel installation manual from
http://www.chironsc.com/downloads_security.html
Connect the board’s Micro USB connector to a laptop / PC running the IRIS Toolbox software.
Download the IRIS Toolbox user guide from
http://www.chironsc.com/downloads_security.html
Defaulting
If at any point a complete default of the dialler is required, use the following procedure:
1.
Completely power down the IRIS Connect by removing the power and one of the batteries (if fitted).
2.
Now press and hold down the AP button.
3.
Reconnect the batteries if needed and reapply power whilst still holding down the AP button for 10 seconds.
