IRIS Connect Series Engineering Manual Version 1.8
Page 31 of 40
Installers Password
When the user first accesses the Installer menu, the Installers
password is required, which is defaulted to ‘111111’. During
installation it will be necessary to change the password as required for
EN50136-2.
This password can be changed again if required with this setting. When
a new password will need to be entered and confirmed.
Latest software?
Check via the Wi-Fi or GPRS connections to the Chiron Reflash server if
there is a later software release available.
Reflash
The option will be given to reflash the unit to the latest version available from the Chiron reflash server.
On first entry to the reflash option, which could be during installation
or maintenance, the password will need to be changed as required for
EN50136-2.
Otherwise the reflash password that has been configured for this unit
will be requested to be entered.
A reflash to update the IRIS Connect dialler to the latest software
version can be initiated and the options are shown below:
Reflash server IP address
The default reflash IP address is the Chiron reflash server setup on an IP
address 195.59.117.164 which is available 24/7 for connections, and
kept up to date with the latest software available.
There are cases where a customer will only open their network to
communicate back to the monitoring centre (network/IP address), and
in some cases the monitoring centre has their own reflash server
installed. This option allows the sending of a reflash request to an
alternate IP address.
Change reflash password
This password can be changed again if required with this setting.
Reflash Now
Initiate the reflash to the reflash IP address and will bring up a status
window to indicate progress.