China Electronics Technology Instruments AV3672 Series, User Manual

Page: 86 / 424

3 Introduction to Use
3.6. Data output
82
Set the file name in the [File name] box. Click [Save] to save the file. Close the dialog box.
3.6.2 Printing of Measurement Contents
The analyzer supports the output of measurement contents through the printer or printing into the specified file. The
local or network printer can be used. The printer can be of parallel, serial or USB interface type. Add the printer in
the WINDOWS operating system.
3.6.2.1 Print Setting
Method of print setting
Menu path: [File] > [Print] > [Page Setup] . Then the page setting dialog box will appear.
Fig. 3.74 Print Setting
[Page Setup] dialog box
1) [Window information] zone
a) [Print] check box
If this check box is selected, the window trace information will be printed. If this check box is cleared, the window
trace information will not be printed. The following two check boxes are effectively only when the above check
box is selected.
b) [Print one window on each page] check box
If this check box is selected, only the information of one window will be printed. If this check box is cleared, the
information of all windows will be printed continuously, with no page breaks.
c) [Print active window] radio box
If this box is selected, only the information of the current active window will be printed.
d) [Print all windows] radio box
If this box is selected, only the information of the current active window will be printed.
2) [Other Information] zone
a) [Print] check box
If this check box is selected, the channel setting information will be printed. The following check boxes are
effectively only when this check box is selected.
b) [Segment Table], [Limit Table], [Marker Table], [Channel Statue] and [Time] check box
Select to print the corresponding information.
3) [Separately print window and other information] check box