China Electronics Technology Instruments AV3672 Series, User Manual

Page: 184 / 424

5 Menu
5.2. Description of menu
180
Select this menu to configure the GPIB address.
Parameter description:
16[0~30].
2) Control panel
Function description:
If this menu is selected, the control panel menu will pop up. The user can set the operating system.
Parameter description:
None
3) System impedance
Function description:
Select this menu to set the system impedance. The system impedance must be changed in measurements of devices
except those of 50Ω, such as waveguide devices.
Parameter description:
50Ω [0Ω-1kΩ].
4) User configuration
Function description:
If this menu is selected, the user can configure it. Configurable options include: “Enable touch screen”, “Save
calibration file in the current time name”, “Not automatically save after calibration”, “Display marker on all the
existing traces”, “Display limit test on all the existing traces”, “Press the UP/DOWN key to change the marker
point by point”, “Install anti-virus software”, “Multi-port calibration” and “Identify port sweep state”.
Parameter description:
None
5) IF options
Function description:
Select this menu to select the intermediate frequency, including the internal intermediate frequency and external
intermediate frequency.
Parameter description:
None
6) Millimeter wave module configuration
Function description:
Select this menu to configure the millimeter wave module, including the model selection, port setting and
frequency setting.
Parameter description:
None
7) Expansion to 16 ports
Function description:
Select this menu to expand the instrument to 16 ports.
Parameter description:
None
8) Touch screen