Chevrolet Spin Manual Download

Page: 207 / 234

VVeehhiiccllee ccaarree

0077

The towing eye is stowed in the tool

kit under the spare wheel in the trunk

compartment of your vehicle.
The hole to fix the towing eye is

located at the front right side and at

the rear right side of the bumpers.

Noottee

The lower parts of the engine, such

as engine supports, skid plate and

control arm, are not suitable as

Disengage the cap at the bottom and

remove downward.

Screw in the towing eye as far as it will

go until it stops in a horizontal

position. It is easier if the lug wrench

is used for leverage.
The displacement of the vehicle by

the towing eye must be in a straight

line and for short distances on paved

grounds.

backing for the lifting of the vehicle.

These parts may be deformed or

even damaged, compromising their

functionality.

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Related manuals for Spin

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Related manuals for Spin

Brands by name

Popular brands