Chevrolet Spin Manual Download Page 111

Page: 111 / 234

Infotainment system

Display the information of the track

being played.
(16)

BACK button

Cancel the input item or return to the

previous menu.
Connecting iPod® player

Below the instrument panel is a

connection for the iPod® with music

files to be played to the USB

connecting terminal.

■ The iPod® product models that are

connected/supported by this

product are as follows.

◆ iPod® 2G Nano/iPod® 3G Nano/

iPod® 4G & 5G Nano

◆ iPod® 120GB & 160GB Classic
◆ iPod® 1G, 2G, & 3G Touch
◆ iPhone® 3G & 3GS

■ Only connect the iPod® to this

product with connection cables

supported by iPod® products.

Other connection cables cannot be

used.

■ In some cases, the iPod® product

may be damaged if the ignition is

turned off when it is connected to

the product.

When the iPod® product is not

being used, keep it separately from

this product with the car ignition

turned off.

■ Once the product finishes reading

the information on the iPod®

device, it will play automatically.

■ If a non-readable iPod® device is

connected, then the relevant error

message will appear and the

product will automatically switch to

the previously used function or the

FM radio function.

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands