manualshive.com logo in svg

Chevrolet Spin, Manual

Share
Download
Chevrolet Spin Manual Download Page 61

Instruments and controls

61

Warning lights, gauges

and indicators

Speedometer

Indicates vehicle speed.

Odometer

The odometer displays the recorded

distance.
It is possible to switch between the

odometer and the trip odometer by

turning the knob of the turn signal

lever.
On the base level vehicle it is possible

to switch between the odometer and

the trip odometer by pressing the

cluster button.

Trip odometer

There is an independent

trip odometer, which displays the

recorded distance since the last

reset.
To reset the trip odometer, select it by

turning the knob of the turn signal

lever. After doing this, hold the reset

knob in the cluster pressed for a few

seconds with the ignition on.

Tachometer

Displays the engine revolutions per

minute.

Summary of Contents for Spin











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands