Chevrolet Spin Manual Download Page 22

Page: 22 / 234

2222

KKeeyyss,, ddoooorrss aanndd w

wiinnddoow

wss

Unnlloocckkiinngg

Raaddiioo rreem

moottee ccoonnttrrooll

Press the button .
The driver's door and liftgate will be

unlocked. Press the button again to

unlock other doors. The hazard

flashers will briefly illuminate twice.
It is possible to unlock all doors and

liftgate by pressing the button once.
Settings can be changed in the

Infotainment menu.
Infotainment system 83.

LLoocckkiinngg

Raaddiioo rreem

moottee ccoonnttrrooll

Press the button .
All doors, including the liftgate will be

locked and the hazard flashers will

briefly illuminate once as standard

when locked successfully.
If the button is pressed a second

time within a few seconds after

locking, a brief sound warning is

issued to confirm successful locking.
Settings can be changed in the

Infotainment menu.
Infotainment system 83.

If the driver's door is not closed

properly, this door lock will not work.

Noottee

Depending on the country of sale

and local legal requirements, horn

warnings will be disabled.

Ceennttrraall lloocckkiinngg bbuuttttoonn

Locks or unlocks all doors.

Press the button to lock.
Press the button to unlock.

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands