manualshive.com logo in svg

Chevrolet Spin, Manual

Share
Download
Chevrolet Spin Manual Download Page 113

Infotainment system

11

3

Exterior Sound (AUX) Input

Limited to models supporting external

sound connection.
Main buttons/Control knob

The following main buttons and

controls are used to enjoy the rich

sound of the Infotainment system

from the sound output of a connected

exterior sound device.
(9) CD/AUX button
With an exterior sound device

connected, press the button

repeatedly to select the exterior

sound (AUX) input mode.
(2) POWER/VOLUME control knob
Turn the control knob to adjust the

volume.
Connecting an exterior sound

Connect the audio output of the

external audio equipment to AUX

input terminal 1 or 2.

■ AUX: Positioned in the Infotainment

device

■ The Infotainment system will

automatically switch to the exterior

sound (AUX) input mode when the

exterior sound device is connected.

Press the CD/AUX button to switch to

the exterior sound input mode if the

exterior sound system has already

been connected.

Summary of Contents for Spin











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands