Chevrolet Spin Manual Download Page 205

Page: 205 / 234

VVeehhiiccllee ccaarree

0055

Lead connection order:

1. Connect the red cable to the

positive terminal of the booster

battery.

2. Connect the other end of the red

cable to the positive terminal of

the discharged battery.

3. Connect the black cable to the

negative terminal of the booster

battery.

Caauuttiioonn

The fans and the other engine

movable parts can cause serious

injuries. Keep the hands and

pieces of cloth away from the

movable parts when the engine is

running, or even with the engine

switched on.

4. Connect the other end of the black

cable to a vehicle grounding point,

such as the engine block or an

engine mounting bolt. Connect at

a minimum distance of 30 cm from

the discharged battery.

Route the leads so that they cannot

catch on rotating parts in the engine

compartment.
To start the engine:

1. Start the engine of the vehicle

providing the jump.

2. After 5 minutes, start the other

engine. If the engine does not

start after some attempts, there is

the possibility that some repairs

might be necessary.

3. Allow both engines to idle for

approximately 3 minutes with the

cables connected.

4. Reverse above sequence exactly

when removing cables.

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands