Chevrolet Spin Manual Download Page 134

Page: 134 / 234

Climate control

Cooling

Cooling is operated with the AC

button and is only functional when the

engine and fan are running.
The air conditioning system cools and

dehumidifies (dries) when the outside

temperature is a little above freezing

point. Therefore condensation may

form and drip from under the vehicle.
If no cooling or drying is required,

switch the cooling system off to save

fuel.
The air conditioning will not operate

when the fan control knob is in the off

position.

Even though the air conditioning is

turned on, the vehicle will produce

warm air if the temperature knob is set

in the red area.
To turn off the air conditioning

system, press the AC again or turn

the fan knob to 0.
If the cooling system is on and you

turn the fan knob to 0, the cooling

system remains on, but inactive,

since the fan is on 0. When you turn

it back to motion, the air conditioning

will work again.

Caution

Use only correct refrigerant.

Warning

Climate control systems have to

be serviced exclusively by

qualified personnel. Improper

service methods may cause

personal injury.

Normal cooling

■ Operate the air conditioning

system.

■ Turn the temperature control knob

to the

desired position.

■ Turn the air distribution knob to the

desired position.

■ Adjust the fan control knob to the

desired speed.

Maximum cooling

Briefly open the windows so that the

hot air can disperse quickly.

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands