Chevrolet Spin Manual Download Page 116

Page: 116 / 234

Infotainment system

Configuration → Bluetooth® Settings

→ Bluetooth® → Device list, and then

press the MENU-TUNE button.

Use the MENU-TUNE button with

control knob to move from the

registered Bluetooth® device to the

device to be connected, and then

press the MENU-TUNE button.

You can select the chosen

Bluetooth® device by turning the

MENU-TUNE knob to the select item.

Confirm the operation by pressing the

MENU-TUNE button.

To disconnecting the chosen

connected Bluetooth® device from

the device list screen, press the

MENU-TUNE button. Confirm the

operation by pressing the MENU-

TUNE button again, so that

Disconnected will be displayed.
Cautions for registering/ connecting

Bluetooth®

Note

Not all phone portal functions are

supported by every mobile phone.

The possible phone functions

depend on the relevant mobile

phone and network provider. You

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands