Chevrolet Spin Manual Download Page 24

Page: 24 / 234

2244

KKeeyyss,, ddoooorrss aanndd w

wiinnddoow

wss

Doooorrss

LLooaadd ccoom

mppaarrttm

meenntt

Oppeenniinngg

Waarrnniinngg

Do not drive with the liftgate open

or ajar, e.g. when transporting

bulky objects, as toxic exhaust

gases could enter the vehicle.

Caauuttiioonn

Before opening the liftgate, check

for overhead obstructions, such as

a garage door in order to avoid

damage to the liftgate. Always

check the moving area above and

behind the liftgate.

Noottee

The installation of certain heavy

accessories onto the liftgate may

affect its ability to remain open.

After unlocking, press the touchpad

below the handle and open the

liftgate.

EEm

meerrggeennccyy lliiftgate unlocking

ftgate unlocking

First remove the cap located in the

inside portion of the liftgate, as shown

in the image below.

Using an appropriate screwdriver,

access the latch and rotate it

counterclockwise.

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands