manualshive.com logo in svg

Chevrolet Spin, Manual

Share
Download
Chevrolet Spin Manual Download Page 97

Infotainment system

          97

AM/FM menu → Update FM/AM

stations list

Press MENU-TUNE button and turn

the MENU-TUNE knob to the Update

FM/AM stations list. To start the

process, press the MENU-TUNE

button.

■ The FM/AM broadcasting list

update will proceed.

■ During the FM/AM broadcasting list

update, press the MENU-TUNE

button or the previous 

P

 BACK

button to stop it from saving

changes.

Fixed mast antenna

To remove the roof antenna, rotate it

counterclockwise. To install the roof

antenna, rotate it clockwise until it is

fully tightened.

Caution

Be sure to remove the antenna

before entering a place with a low

ceiling or it may be damaged.
Entering the automatic car wash

with the antenna installed may

result in damage to the antenna or

the roof panel. Be sure to remove

your antenna before entering the

automatic car wash.

Summary of Contents for Spin











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands