Chevrolet Spin Manual Download Page 151

Page: 151 / 234

Driving and operating

1. Turn the steering wheel to the

right and to the left.

2. Alternate the transmission

between first, second and reverse

gear, releasing the accelerator

when shifting.

3. After the transmission is shifted,

slightly press the accelerator.

4. If the vehicle is still stuck after a

few tries, it has to be towed.

Starting and operating

New vehicle running-in

Use the following precautions for the

first few hundred kilometres to

improve the performance and

economy of your vehicle:

■ Avoid full-acceleration starts.
■ Do not race the engine.
■ Avoid hard stops except in

emergencies. This will allow your

brakes to run in properly.

■ Avoid quick starts, sudden

accelerations, and prolonged

high-speed driving in order to avoid

damage to the engine and to

conserve fuel.

■ Avoid full acceleration in low gear.
■ Do not tow any other vehicle.

Ignition switch positions

0 = Ignition off

1 = Ignition off, steering wheel lock

released

2 = Ignition on

3 = Starting

Summary of Contents for Spin











































































































































































































































Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands

Chevrolet Spin, Manual

Search results

Summary of Contents for Spin

Reviews:

Brands by name

Popular brands