manualshive.com logo in svg

Chevrolet Spin, Manual

Share
Download
Chevrolet Spin Manual Download Page 152

1155

22

D

Drriivviinngg  aanndd  ooppeerraattiinngg

D

Daannggeerr

Do not turn the key to 0 or 1

position while driving.
Vehicle and brake assistance

would not operate, causing vehicle

damage, personal injury or

possibly death.

C

Caauuttiioonn

Do not leave the key in the 1 or 2

position for extended periods

while the engine is not running.

This will discharge the battery.

SSttaarrttiinngg  tthhee  eennggiinnee

SSttaarrttiinngg  eennggiinnee  w

wiitthh  tthhee  iiggnniittiioonn

ssw

wiittcchh

■ Turn the key to position 11.
■ Move the steering wheel slightly to

release the steering wheel lock.

■ Automatic transmission: press and

  hold brake pedal and move selector

  lever to P or N.
■ Do not accelerate.
■ Turn the key to position 33.

Before restarting or to switch off the

engine, turn key back to 00.

C

Caauuttiioonn

Do not operate the starter motor

longer than 10 seconds at one

time. This may damage the starter

motor or discharge the battery.

PPaarrkkiinngg

■ Do not park the vehicle on an easily

ignitable surface. The high

temperature of the exhaust system

could ignite the surface.

■ Always apply the parking brake

without pressing the release button.

Apply as firmly as possible on

downhill or uphill slopes. Press the

foot brake at the same time to

reduce operating force.

■ Switch off the engine and ignition.

Turn the steering wheel until the

steering wheel lock engages.

■ If the vehicle is on a level surface or

uphill slope engage first gear

before switching off the ignition. On

Summary of Contents for Spin











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands