Chevrolet Captiva CN202SR, Owner'S Manual

Page: 98 / 197

94 Lighting
Hazard Flasher
Press to turn on/off the hazard
flasher.
Turn and Lane Change Signal
Lamp
To turn on the turn and lane change
signal lamp, the ignition switch must be
in ON position.
Control lever upward = right turn signal
lamp
Control lever downward = left turn signal
lamp
After cornering, the turn signal interrupts
automatically and the control lever
returns to the normal position.
To change the lane, you can pull the
control lever to halfway position (not
reaching the turn signal lamp position)
and keep pulling it. After lane change,
release the control lever and it will
return
to the normal position
automatically.
A rear turn signal lamp is integrated on
the rear combination lamp and the
rear
bumper of your vehicle
respectively. If you turn on the turn
signal lamp with the liftgate open, the
turn signal lamp on the rear bumper
will illuminate. This ensures that a turn
signal is sent to the drivers behind
even when the liftgate is open.