Chevrolet Captiva CN202SR, Owner'S Manual

Page: 64 / 197

60 Instrument and control device
Front windshield wiper and
washer
To use the windshield wiper, turn the
ignition on and then the windshield
wiper/washer
lever. The front
windshield wiper has the following five
working positions:
MIST: Pull the lever up once and wipe
it a single time.
OFF: The system shut down
INT: pull the lever down to the INT
position and wipe the windshield
intermittently.
LO: pull the lever down to the LO
position and wipe the windshield
continously with low speed.
HI: pull the lever down to the LO position
and wipe the windshield continously with
high speed.
The speed of the intermittent wiper (INT)
is adjustable. Turn the ring knob in the
middle of the lever to select the
appropriate speed.
To spray the front windshield washer:

The ignition switch is in ON
position.

Pull the control lever of windshield
wiper/washer towards yourself
If the lever is pulled for more than about
1 second, the washer sprays onto the
windshield, and the wiper operates for 3
cycles or until the joystick is released.
Caution
 The driver's blurred
vision can cause an accident,
resulting in personal injury and
damage to the vehicle or other
property.
 In the cold season, if
the wiper has been frozen, use
a warm water to pour the
frozen part before the wiper is
used, and then dry the water
immediately
to prevent
freezing.