Chevrolet Captiva CN202SR, Owner'S Manual

Page: 124 / 197

120 Driving and operation
● START
At the ON position, turn the
transmission at the neutral or P
position, and depress the clutch pedal
(for MT model) or brake pedal (for AT
model). Then the green indicator on
the ENGINE START STOP switch
illuminates.
Press the ENGINE
START STOP switch once, and the
engine will start. After the engine
starts, the ignition switch keeps at the
ON position.
●
OFF
Press the start switch once (vehicle
speed < 2 Km/h).
Note
Never keep the engine idling
at high speed for over 5 min.
Excess
temperature will
damage the exhaust
system.
Note
Never release the brake pedal
in the process of starting the
engine; otherwise, the engine
may fail to start. If the
transmission is not at the
neutral or P position, the
engine cannot start
.
Electronic Steering Column
Lock
As the electronic steering column lock
is used to lock the steering wheel, the
vehicle having the ENGINE START
STOP function is equipped with the
electronic steering column lock at the
same time. You can hear the
operating sound when the lock device
is started or released.
If locking the steering wheel is
required, following conditions shall be
met at the same time:
1. The vehicle is motionless;
2. The ignition switch is at the LOCK
position.
When conditions above are met, the
steering
wheel will be locked
immediately if any one of following
actions occur:

Open or close the left front door.

Remote locking

Wait 24s later