Chevrolet Captiva CN202SR, Owner'S Manual

Page: 179 / 197

Vehicle maintenance 175
Front towing hook
There is a hole cover at the right side
of the front bumper of the vehicle; the
fixing hole for installing towing hook
can be seen by opening the hole
cover. Put the towing hook in the
toolkit, take out the towing hook and
install it on the fixing hole, rotate the
towing hook to tighten it clockwise,
and insert the socket spanner into the
towing
hook hole for auxiliary
tightening. Conduct towing after
guaranteeing that the towing hook is
firmly fixed. When towing, the driver
must operate the rotating and brake
systems in the vehicle. Remove the
towing hook and close the hole cover
after towing, place the towing hook back
into the toolkit.
Note
When towing with rope, the
towed vehicle may be out of
control.
 The towing distance shall
not be too long. And the
vehicle shall be towed at
low speed.
 If the wheel, transmission,
axle shaft, steering or
brake system is damaged,
the
towing shall be
prohibited.
It is prohibited to pull out the
key from the ignition switch, or
the steering wheel will be
locked restricting the driving of
the vehicle.
Caution
The trailing speed shall not
exceed 30Km/h, and the
trailing
speed shall not
exceed 40Km. For the long-
distance trailing, you should
ask the Authorized Workshop
or
professional trailing
service institute for trailing.