Chevrolet Captiva CN202SR, Owner'S Manual

Page: 128 / 197

124 Driving and operation
recover the speed to the original
cruising speed.
Second Step: How to Deactivate
Cruise
If you are to immediately decelerate in
case of any emergency in front during
cruise control, you can depress the
brake pedal or clutch pedal, or press
the cruise deactivation button “
” or
pull the toggle button towards “ ”
direction. In this case, the vehicle exits
from the current cruise state and
enters the cruise activation state, and
the cruise indicator of instrument
flicke
rs; if you press the “ ” button or
pull the toggle button towards “ ”
button in the cruise state, the whole
cruise system will be deactivated and
the instrument indicator will go out.
Third Step: Operation for Cruise
Recovery
When the vehicle exits from the cruise
state and enters the cruise activation
state, if you are to carry out the cruise
control at the previous cruising speed,
you just need pull the toggle button
once towards the “RES/+” direction.
Then cruise control is carried out at the
previously-saved speed recovered. For
example, the cruising speed is 60 Km/h
before braking and becomes 50 Km/h
after braking, and at the time the cruise
indicator of instrument flickers. Pull the
toggle button once towards the “RES/+”
direction; the cruise indicator will be
normally on, and the vehicle will
automatically speed up to 60 Km/h and
enter the cruise control state.
Fourth Step: How to Promote Cruise
Control Speed
Pull the toggle button towards the
“RES/+” direction and the set cruising
speed will rise without the need to
depress the accelerator pedal. The
speed will rise by 2 km/h every time you
pull up the switch once. If the toggle
button is kept pressed, the vehicle
speed will continuously rise. Once the
switch is released, the then running
speed will be saved into the memory and
the vehicle will cruise at the speed.
Fifth Step: How to Reduce Cruise
Control Speed
Pull the toggle button towards the “SET/-
” direction to reduce the cruising speed.
The speed will reduce by 2 km/h every
time you pull down the switch once. If
the toggle button is kept pressed, the
vehicle
speed will continuously
reduce. Once the control lever is
released, the then running speed will
be saved into the memory and the
vehicle will cruise at the speed. If the
toggle button is released when the
vehicle speed reduces to about 40
km/h (less than 40 km/h), the saved
value will be deleted. If you are to
continuously drive at the cruise control
speed, you need reset the cruising
speed.