Instrument and Control 83
Caution
Don’t drive the vehicle if brake
system warning lamp is not
lighted up when park brake is
engaged and ignition switch
is switched on.
Ensure that warning lamp LED
works normally. In case that
the park brake is engaged but
the lamp is not lighted up
when the ignition switch is
connected, although warning
lamp LED works normally , it
is suggested to go to the
nearest Authorized Workshop
to inspect vehicle brake
system. These circumstances
indicate that your vehicle
brake system may have fault.
Engine
anti-theft
system
indicator
After switching on the ignition switch, if
the indicator turns off after it is lighted up
for a short time, it indicates that the
indicator works normally. Refer to
“Engine anti-theft system”.
Driver seat belt warning lamp
Seat belt warning lamp is lighted up
when ignition switch is ON. Afterwards
if the driver fails to fasten seat belt
properly, the following circumstances
will occur:
Seat belt warning lamp will be lighted
up;
Warning lamp will flash at speed
>
20km/h, and meanwhile warning
buzzer will ring for a while.
Summary of Contents for Captiva CN202SR
