Chevrolet 2013 Malibu Owner'S Manual Download Page 213

Page: 213 / 436

Black plate (7,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Climate Controls

8-7

Sensors

The solar sensor on top of the
instrument panel near the
windshield monitors the solar heat.

The climate control system uses
the sensor information to adjust
the temperature, fan speed,
recirculation, and air delivery mode
for best comfort.

If the sensor is covered, the
automatic climate control system
may not work properly.

Air Vents

Center Air Vents

Use the slider knobs on the air
vents to change the direction of the
airflow.

Move the slider knobs outward or
inward to open or close off the
airflow.

Side Air Vents

Use the thumbwheels to change the
direction of the airflow.

Move the vertical thumbwheels up
or down to open or close off the
airflow.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands