Chevrolet 2013 Malibu Owner'S Manual Download Page 299

Page: 299 / 436

Black plate (33,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Vehicle Care

10-33

3. Remove the bulb by turning it

counterclockwise and pulling it
straight out of the assembly.

4. Disconnect the electrical

connector from the fog lamp bulb
assembly.

5. Install the new bulb by turning it

clockwise into the assembly.

6. Reverse Steps 1

–

4 to reinstall.

Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps (LS and LT)

1. Back-Up Lamp

2. Taillamp

Trunk Deck Inboard Taillamp and
Back-Up Lamp

1. Open the trunk. See

Trunk on

page 2

‑

2. Remove the push pins and pull

back the trunk deck trim.

3. Remove the bulb socket by

turning counterclockwise and
pulling straight out.

4. Remove the bulb from the

socket.

5. Install the new bulb in the bulb

socket.

6. Install the bulb socket by turning

clockwise.

7. Install the trunk deck trim.

1. Stoplamp/Taillamp

2. Turn Signal Lamp

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands