Chevrolet 2013 Malibu Owner'S Manual Download Page 344

Page: 344 / 436

Black plate (78,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

10-78

Vehicle Care

There is only enough sealant to seal
one tire. After usage, the sealant
canister and sealant/air hose
assembly must be replaced. See

“

Removal and Installation of the

Sealant Canister

”

following.

Using the Tire Sealant and
Compressor Kit to Temporarily
Seal and Inflate a
Punctured Tire

Follow the directions closely for
correct sealant usage.

When using the tire sealant and
compressor kit during cold
temperatures, warm the kit in a

heated environment for five minutes.
This will help to inflate the tire
faster.

If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See

Hazard

Warning Flashers on page 6

‑

See

If a Tire Goes Flat on

page 10

‑

for other important

safety warnings.

Do not remove any objects that
have penetrated the tire.

1. Remove the tire sealant and

compressor kit from its storage
location. See

Storing the Tire

Sealant and Compressor Kit on
page 10

‑

2. Unwrap the sealant/air hose (6)

and the power plug (8).

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground
so the hose will reach it.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands