Chevrolet 2013 Malibu Owner'S Manual Download Page 106

Page: 106 / 436

Black plate (2,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

4-2

Storage

Cupholders

Center Console

With the armrest in the rearward
position, push down on the cover
handle and slide the cover forward
to access the cupholders.

The vehicle may have removable
cupholders.

To remove the cupholders:

1. Pull and hold the tab at the rear

of the cupholders.

2. Lift up and rearward.

To reinstall, place the two forward
tabs into the slots and push down
on the rear of the cupholder.

Rear Seat

Lower the armrest to access the
cupholders. There is also storage in
the armrest; lift the lid to access.

Sunglasses Storage

Push on the cover and release to
open the compartment.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands