Chevrolet 2013 Malibu Owner'S Manual Download Page 370

Page: 370 / 436

Black plate (104,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

10-104

Vehicle Care

Removing and Replacing the
Floor Mats

Pull up on the rear of the floor mat
to unlock each retainer and remove.

Reinstall by lining up the floor mat
retainer openings over the carpet
retainers and snapping into position.

Make sure the floor mat is properly
secured in place.

Verify the floor mat does not
interfere with the pedals.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands