Chevrolet 2013 Malibu Owner'S Manual Download Page 147 | Manualshive

Page: 147 / 436

background image

Black plate (39,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Instruments and Controls

5-39

Memory Remote Recall

This allows the Memory Remote
Recall feature to be turned on or off.

When on, this feature will recall the
current driver's last seat and outside
mirror positions upon unlocking the
driver door with the RKE transmitter,
and opening that door. The current
driver is identified when the RKE
transmitter is used to unlock the
driver door. If keyless access
equipped, the recall will occur upon
opening the driver door. See

“

Recalling RKE Memory Positions

”

under

Memory Seats on page 3

.

Press TUNE/MENU when Memory
Remote Recall is highlighted. Turn
the TUNE/MENU knob to select On
or Off. Press TUNE/MENU to
confirm and go back to the
last menu.

Remote Left in Vehicle Reminder

This allows the Remote Left in
Vehicle Reminder feature to be
turned on or off. If on, the horn will
chirp if a remote is left in the
vehicle.

Press TUNE/MENU when Remote
Left in Vehicle Reminder is
highlighted. Turn the TUNE/MENU
knob to select On or Off. Press
TUNE/MENU to confirm and go
back to the last menu.

Relock Remote Door

When on, the doors will
automatically lock after a period of
time if the vehicle is not entered or
exited.

Press TUNE/MENU when Relock
Remote Door is highlighted. Turn
the TUNE/MENU knob to select
On or Off. Press TUNE/MENU
to confirm and go back to the
last menu.

Passive Door Lock

This allows selection of which doors
are unlocked by pressing the button
on the outside door handle.

Press TUNE/MENU when Passive
Door Lock is highlighted. Turn the
TUNE/MENU knob to select Off, On,
or On with Active Horn Chirp. Press
TUNE/MENU to confirm and go
back to the last menu.

Passive Door Unlock

This allows selection of which doors
are locked by pressing the button on
the outside door handle.

Press TUNE/MENU when Passive
Door Unlock is highlighted. Turn the
TUNE/MENU knob to select All
Doors or Driver Door. Press TUNE/
MENU to confirm and go back to the
last menu.

«
...
145
146
147
148
149
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

Brand: KC HiLiTES Pages: 4

Brand: Back View Pages: 168

Brand: CAMPARK Pages: 20

Brand: Warrior Products Pages: 3

Vantage 12 Series

Brand: Ecco Pages: 5

Brand: STC Pages: 6

Brand: Yakima Pages: 12

Brand: Axxess Pages: 16

Brand: Improved Racing Pages: 17

Brand: Toyota Pages: 165

Speed & Route Profiler

Brand: Racelogic Pages: 24

Brand: Brink Pages: 26

Brand: Master Tailgaters Pages: 10

Brand: v.link Pages: 19

HOLLANDIA 700 - 20 Series

Brand: Webasto Pages: 30

Brand: CITROEN Pages: 86

Brand: Porsche Pages: 145

Follow me RAPID INTRACKER

Brand: Thule Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands