Chevrolet 2013 Malibu Owner'S Manual Download Page 144 | Manualshive

Page: 144 / 436

background image

Black plate (36,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

5-36

Instruments and Controls

Auto Defog

Only vehicles with dual automatic
climate control will have this option.
This will allow you to turn the auto
defog on or off.

Press TUNE/MENU when Auto
Defog is highlighted to open the
menu. Turn the TUNE/MENU knob
to highlight On or Off. Press TUNE/
MENU to confirm the selection and
move back to the last menu.

Auto Rear Defog

This will allow you to turn the auto
rear defog on or off. This feature will
automatically turn on the rear
window defogger when it is cold
outside.

Press TUNE/MENU when Auto
Rear Defog is highlighted to open
the menu. Turn the TUNE/MENU
knob to highlight On or Off. Press
TUNE/MENU to confirm the
selection and move back to the
last menu.

Comfort and Convenience

Select the Comfort and
Convenience menu and the
following may be displayed:

.

Easy Exit Driver Seat

.

Chime Volume

.

Reverse Tilt Mirror

Easy Exit Driver Seat

When on, this feature will move the
driver seat rearward upon turning
the ignition off and opening the
driver door. This may be done to
make it easier to exit the vehicle.
See

“

Easy Exit Driver Seat

”

under

Memory Seats on page 3

This feature can be turned on or off.

Press TUNE/MENU when Easy Exit
Driver Seat is highlighted. Turn the
TUNE/MENU knob to select On or
Off. Press TUNE/MENU to confirm
and go back to the last menu.

Chime Volume

This allows selection of the chime
volume level.

Press TUNE/MENU when Chime
Volume is highlighted. Turn the
TUNE/MENU knob to select Normal
or High. Press TUNE/MENU to
confirm and go back to the
last menu.

Reverse Tilt Mirror

When on, both the driver and
passenger mirrors will tilt downward
when the vehicle is shifted to
R (Reverse) to improve visibility of
the ground near the rear wheels.
They will return to their previous
driving position when the vehicle is
shifted out of R (Reverse), the
ignition is turned to OFF, or the
vehicle is left in R (Reverse). See

Reverse Tilt Mirrors on page 2

.

Press TUNE/MENU when Reverse
Tilt Mirror is highlighted. Turn the
TUNE/MENU knob to select On or
Off. Press TUNE/MENU to confirm
and go back to the last menu.

«
...
142
143
144
145
146
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

Brand: JAC Pages: 70

Brand: Jeep Pages: 212

Brand: Porsche Pages: 144

Multiple G9F18 AU000

Brand: Genesis Pages: 3

Brand: Doug Thorley Headers Pages: 5

Brand: Edelbrock Pages: 2

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: muth Pages: 10

Dodge Challenger SRT8®Challenger SRT8 392 2012

Brand: Dodge Pages: 5

Brand: Edelbrock Pages: 2

Brand: ULTIMATE SPEED Pages: 50

Brand: Skoda Pages: 281

Brand: Abrams Pages: 12

Fleetwood Brougham Sedan 1966

Brand: Cadillac Pages: 56

Brand: OHIOSTEEL Pages: 2

Brand: Metra Electronics Pages: 8

BLADE-AL-HK4-EN

Brand: iDataLink Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands