Chevrolet 2013 Malibu Owner'S Manual Download Page 14

Page: 14 / 436

Black plate (8,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

1-8

In Brief

Power Seats

To adjust a power seat, if equipped:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.

Raise or lower the entire seat by
moving the entire control up
or down.

See

Power Seat Adjustment on

page 3

‑

Lumbar Adjustment

To adjust the lumbar support,
if available:

Press and hold the front or rear
of the control to increase or
decrease lumbar support.

Press and hold the top or bottom
of the control to raise or lower
the height of the lumbar support.

See

Lumbar Adjustment on

page 3

‑

Reclining Seatbacks

Manual Reclining Seatbacks

To recline a manual seatback:

1. Lift the lever.

2. Move the seatback to the

desired position, and then
release the lever to lock the
seatback in place.

3. Push and pull on the seatback to

make sure it is locked.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands