Chevrolet 2013 Malibu Owner'S Manual Download Page 190

Page: 190 / 436

Black plate (30,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

7-30

Infotainment System

3. After the system determines

what type of Bluetooth device is
being paired, the Bluetooth
device will need to be put into
discovery mode.

4. Some devices may require a

Personal Identification Number
(PIN) in order to complete the
pairing process. Locate the
device named

“

GMusicConnect

”

in the list on the Bluetooth
device and follow the
instructions on the device to
enter the four-digit PIN provided
by the infotainment system.

Connecting to a Device

Once a device is paired to the
infotainment system, it can be
connected to the infotainment
system.

To connect a paired device when no
other device is connected to the
infotainment system:

1. Select the Select Device option

from the Bluetooth Music
Setup menu.

2. Select the new device.

To connect a paired device when
another device is connected to the
infotainment system:

1. Select the Select Device option

from the Bluetooth Music
Setup menu.

2. Select the new device.

3. The active device is

disconnected from the system
and the new device is
connected.

Removing a Device

1. Select Remove Device from the

Bluetooth Music Setup menu.

2. Select the device.

3. The device is removed from the

system.

Before connecting to the removed
device again, it will need to paired
to the infotainment system.

Changing the Default PIN

To change the default PIN:

1. Select Change Default PIN from

the Bluetooth Music
Setup menu.

2. Select one of the pre-defined

PINs, or select Other to create
a PIN.

To create a PIN:

1. Select the length of the PIN.

2. Enter the character sequence.

Messages

The following messages may
appear on the infotainment screen.

Poor Bluetooth Signal Quality:

This message displays when the
Bluetooth signal strength is low.

This Feature is Unavailable While
Vehicle is Moving:

This message

displays when an action is not
allowed while the vehicle is moving.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands