Chevrolet 2013 Malibu Owner'S Manual Download Page 297 | Manualshive

Page: 297 / 436

background image

Black plate (31,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Vehicle Care

10-31

5. Disengage the spring clip (2)

from the bulb by pressing down
on the end and then swing
upward.

6. Remove the bulb from the lamp

assembly.

7. Install a new bulb in the lamp

assembly.

8. Install the spring clip (2).

9. Connect the electrical

connector (1).

10. Replace the cap from the back

of the headlamp assembly by
turning it clockwise.

11. For the driver side, reinstall the

windshield washer bottle filler
neck by firmly pushing it
straight into the bottle. Ensure
that the filler neck clip engages
into the underhood electrical
center retainer.

Low-Beam Headlamp

1. For the driver side bulb, remove

the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.

2. Remove the cap from the back

of the headlamp assembly by
turning it counterclockwise.

3. Disconnect the electrical

connector.

4. Remove the bulb from the lamp

assembly by turning
counterclockwise.

5. Install a new bulb in the lamp

assembly.

6. Connect the electrical connector.

7. Replace the cap from the back

of the headlamp assembly by
turning it clockwise.

8. For the driver side, reinstall the

windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.

HID Headlamp Assembly

The HID assembly has a high
intensity discharge (HID) high/low
beam, a DRL/parking lamp,
sidemarker lamp, and a turn signal
lamp on the headlamp assembly.

For replacement of the headlamp on
an HID assembly, contact your
dealer. See

High Intensity

Discharge (HID) Lighting on
page 10

«
...
295
296
297
298
299
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

Brand: Valeo Pages: 17

Brand: Toyota Pages: 529

Brand: SnapPad Pages: 5

Brand: Toro Pages: 24

Brand: Harman Kardon Pages: 16

Brand: TATA Motors Pages: 184

PW-50C Civilian

Brand: B&G electronics Pages: 7

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Tata Indigo Diesel

Brand: TATA Motors Pages: 190

Prime Design HBR-E-FT33B

Brand: Safe Fleet Pages: 12

Brand: JANE Pages: 58

Brand: Volvo Pages: 211

Brand: Buick Pages: 371

Brand: Brodit Pages: 2

Brand: Volkswagen Pages: 68

Even Brake 9400

Brand: Roadmaster Pages: 20

Brand: Volkswagen Zubehör Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands