Chevrolet 2013 Malibu Owner'S Manual Download Page 381

Page: 381 / 436

Black plate (11,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Service and Maintenance

11-11

Wheel Alignment

Wheel alignment is critical for
ensuring that the tires deliver
optimal wear and performance.

Signs that the alignment may
need to be adjusted include
pulling, improper vehicle
handling, or unusual tire wear.

Your dealer has the required
equipment to ensure proper
wheel alignment.

Windshield

For safety, appearance, and the
best viewing, keep the windshield
clean and clear.

Signs of damage include
scratches, cracks, and chips.

Trained dealer technicians can
inspect the windshield and
recommend proper replacement
if needed.

Wiper Blades

Wiper blades need to be cleaned
and kept in good condition to
provide a clear view.

Signs of wear include streaking,
skipping across the windshield,
and worn or split rubber.

Trained dealer technicians can
check the wiper blades and
replace them when needed.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands