Chevrolet 2013 Malibu Owner'S Manual Download Page 12

Page: 12 / 436

Black plate (6,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

1-6

In Brief

To lock or unlock the doors from the
inside:

Center Stack

Front Door Panels

Press

on the center

stack or the front door panels.

Push the door lock knob on the
top of the door to lock the
door only.

Pull the door handle once to
unlock the door. Pulling the
handle again unlatches the door.

See

Door Locks on page 2

‑

Power Door Locks on page 2

‑

Windows

Push the switch down to open the
window. Pull the front of the switch
up to close it.

The power windows only operate
with the ignition in ACC/
ACCESSORY or ON/RUN/START,
or when Retained Accessory
Power (RAP) is active. See

Retained Accessory Power (RAP)
on page 9

‑

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands