Chevrolet 2013 Malibu Owner'S Manual Download Page 350

Page: 350 / 436

Black plate (84,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

10-84

Vehicle Care

3. Turn the wing nut

counterclockwise to remove it.

4. Remove the tire sealant and

compressor kit.

To store the tire sealant and
compressor kit, reverse the steps.

Tire Changing

Removing the Spare Tire and
Tools

1. Screwdriver (If Equipped)

2. Tow Hook (If Equipped)

3. Jack

4. Wrench (In Bag)

5. Trim Removal (If Equipped)

6. Fastener (If Equipped)

To access the spare tire and tools:

1. Open the trunk.

2. Remove the spare tire cover.

3. Turn the retainer nut

counterclockwise and remove
the spare tire. Place the spare
tire next to the tire being
changed.

4. The jack and tools are stored

below the spare tire. Remove
them from their container and
place them near the tire being
changed.

Removing the Flat Tire and
Installing the Spare Tire

Take off the wheel cover or center
cap, if the vehicle has one, to reach
the wheel bolts.

1. Do a safety check before

proceeding. See

If a Tire Goes

Flat on page 10

‑

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands