Chevrolet 2013 Malibu Owner'S Manual Download Page 145 | Manualshive

Page: 145 / 436

background image

Black plate (37,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Instruments and Controls

5-37

Lighting

Select the Lighting menu and the
following may be displayed:

.

Vehicle Locator Lights

.

Exit Lighting

Vehicle Locator Lights

This allows the vehicle locator lights
to be turned on or off. The vehicle
locator lights come on when
unlocking the vehicle with the RKE
transmitter.

Press TUNE/MENU when Vehicle
Locator Lights is highlighted. Turn
the TUNE/MENU knob to select On
or Off. Press TUNE/MENU to
confirm and go back to the
last menu.

Exit Lighting

This allows selection of how long
the exterior lamps stay on when
leaving the vehicle and it is dark
outside.

Press TUNE/MENU when Exit
Lighting is highlighted. Turn the
TUNE/MENU knob to select Off,
30 Seconds, 1 Minute, or 2 Minutes.
Press TUNE/MENU to confirm and
go back to the last menu.

Power Door Locks

Select Power Door Locks and the
following may be displayed:

.

Unlocked Door Anti Lock Out

.

Auto Door Unlock

.

Delayed Door Lock

.

Auto Door Lock

Unlocked Door Anti Lock Out

When on, this feature will keep the
driver door from locking when the
door is open. If Off is selected, the
Delayed Door Lock menu will be
available and the door will lock as
programmed through this menu.

Press TUNE/MENU when Unlocked
Door Anti Lock Out is highlighted.
Turn the TUNE/MENU knob to

select On or Off. Press TUNE/
MENU to confirm and go back to the
last menu.

Auto Door Unlock

This allows selection of which of the
doors will automatically unlock when
the vehicle is shifted into P (Park).

Press TUNE/MENU when Auto
Door Unlock is highlighted. Turn the
TUNE/MENU knob to select All
Doors, Driver Door, or Off. Press
TUNE/MENU to confirm and go
back to the last menu.

Delayed Door Lock

When on, this feature will delay
the locking of the doors until
five seconds after the last door is
closed. Three chimes will signal
delayed locking is in use. Press
either the power lock button or

Q

on

the RKE transmitter twice to
override the delayed locking feature
and immediately lock all of the
doors.

«
...
143
144
145
146
147
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

NPL-TV 7874 DIGITAL

Brand: Napoli Pages: 20

Wallbox eM4 Single

Brand: ABL Pages: 68

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: Mercedes-Benz Pages: 30

Brand: AMP Research Pages: 12

Half Size Trunk Box Organizer C-TBO-CV

Brand: Havis-Shields Pages: 1

Brand: Volvo Pages: 8

Brand: BESAFE Pages: 4

Brand: PAC Pages: 4

Brand: Ford Pages: 368

Ferrari 360 Map Carbon Light

Brand: MAcarbon Pages: 4

Brand: Veigel Pages: 24

Brand: Cellular Line Pages: 25

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

Brand: Volvo Pages: 362

Brand: Valueline Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands